just got the guitar I used for this video back from finish.... Tony ferguson
rocks!! Seriously you all. If you need a finish guy..give him a chance..he
really is awesome.
616-842-4114 is his number. Tell him John sent ya and he'll treat ya
right!
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| NEW Binding DVD’s shipped http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=2631 |
Page 1 of 1 |
| Author: | John Mayes [ Thu Jul 28, 2005 12:42 pm ] |
| Post subject: | |
Finally got the binding DVD's done and shipped. Thanks for all who patiently waited. If your interested in getting the video head on over to mayes music (link in my sig) and check it out. the DVD is about 2 hours and 15 long. filled with good stuff! You can see a montage at the site. If you have any trouble ordering (the site has acted a little funky to some people, but not all) let me know and I can get you a paypal invoice, or you can call and order it, or even mail a check. thanks! http://www.mayesmusic.com/index.php? main_page=product_info&products_id=449 |
|
| Author: | FrankC [ Thu Jul 28, 2005 12:48 pm ] |
| Post subject: | |
You have a PM John...Its acted funky for me |
|
| Author: | John Mayes [ Thu Jul 28, 2005 1:42 pm ] |
| Post subject: | |
Thanks frank. I sent you an invoice. Cheers, John |
|
| Author: | stan thomison [ Fri Jul 29, 2005 1:18 am ] |
| Post subject: | |
John did you do or planning the neck building and setting video's? |
|
| Author: | John Mayes [ Fri Jul 29, 2005 2:01 am ] |
| Post subject: | |
I did the neck building videos, but Still working on the neck setting video. |
|
| Author: | stan thomison [ Fri Jul 29, 2005 3:00 am ] |
| Post subject: | |
We do all CNC necks from vendor at the shop and don't want to spend the 2-3K for program and min 25 neck purchase, so save me a video and pick it up in person when back home PLEASE |
|
| Author: | John Mayes [ Fri Jul 29, 2005 3:08 am ] |
| Post subject: | |
just got the guitar I used for this video back from finish.... Tony ferguson rocks!! Seriously you all. If you need a finish guy..give him a chance..he really is awesome. 616-842-4114 is his number. Tell him John sent ya and he'll treat ya right!
|
|
| Author: | John How [ Fri Jul 29, 2005 3:11 am ] |
| Post subject: | |
John, where is he located? |
|
| Author: | John Mayes [ Fri Jul 29, 2005 4:16 am ] |
| Post subject: | |
michigan. He ships things very well too! |
|
| Author: | John Mayes [ Sun Jul 31, 2005 7:00 am ] |
| Post subject: | |
Everyone must have binding down pat. Gotten very few orders for this one. Oh well.... Bump for anyone who may be interested... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|